Channel type drying system features
1.High thermal efficiency, it is the most advanced chips drying equipment in the world,equipped with automatic operating system, moisture content online detection device, fire extinguishing and explosion-proof device, with high efficiency and energy saving, high automation, simple operation, stable operation, uniform moisture content of chips after drying and other advantages.
2.The preheating device will blow the chips entering the system, so that the chips and hotair are fully mixed, At the same time, the impurities such as high density wood, sand andstone, nonferrous metal are pre-sorted and discharged through the discharge system.
3.The emergency discharge system is used to discharge the chips that enter the systemthrough the rapid discharge device when the dryer breakdown, so as to avoid furtherlosses caused by entering the subsequent equipment.
Ultra-low discharge Wet ESP
The wet ESP is the most advanced wet electrostatic dust removal technology introduced by our company,
Combined with the operating conditions of the wood-based panel thermal drying system and developed energy-saving,efficient and ultra-low emission system suitable for the wood-based panel project.
The system can achieve an outlet particulate concentration of less than 10mg/Nm3
Technical parameters
| Press parameter |
4 ft |
6 ft |
8 ft |
9 ft |
| Designed max pressing speed |
mm/s |
1500 |
1500 |
1500 |
1500 |
| Heating platen width |
mm |
1430 |
2050 |
2650 |
2950 |
| Steel belt infeed roller diameter |
mm |
2070 |
2070 |
2070 |
2070 |
| Steel belt discharge roller diameter |
mm |
2100 |
2100 |
2100 |
2100 |
| Roller rod diameter |
mm |
18 |
18 |
18 |
18 |
| Steel belt width |
mm |
1450 |
2070 |
2670 |
2970 |
| Max zone length |
Mpa |
5 |
5 |
5 |
5 |
| Heating zone length |
According to production capacity and hot pressing factor |
| Total power |
According to production capacity and product type |
Our Mechanical advantages
1. The hot press has a small gear opening, short auxiliary time, thin pre curing layer, and low sanding intensity. The machine operation is simple, the automatic detection is complete, and it can easily meet the requirements of automated production under unmanned control.
2. The products produced are in large format specifications and can be cut into non-standard sizes with different specifications according to user needs, meeting the diverse needs of users. The slab paving and transportation distance of the press is short, and the thickness symmetry of the paved slab is not easily damaged, and the finished slab will not deform.
3. The use of hot press machines has a low failure rate, long component life, and low maintenance costs.
WHY CHOOSE CHINA XINGTENG (GINZHUO) ?
• One stop, whole plant solution supplier for MDF / HDF, OSB and Particle board.
• More than 300 production lines of PB / OSB / MDF / HDF board running on market.
• More than 30 years experience in wood-based panel field.
• Over 200 engineers and technicians for R&D and customer service.
• Over 3000 sets wood panel sanding machine and 2000 sets wood chipping machine running on market.
• Wholly state-owned enterprise, a reliable partner.
• 24-hour quick feedback for technical questions and service.
• No matter which country you are in, we will provide on-site after-sales service.
Please feel free to contact us for more information about Wood-based panel machinery!
){kind=link}