| Customization: | Available |
|---|---|
| Type: | Hot Press Machine |
| Automatic: | Automatic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The main products of Xingteng(Ginzhuo) are: M(H)DF,Particleboard(PB), oriented strand board(OSB) and veneer light oriented structural board (FOSB) and other wood-based board Mat-forming, Prepress, Hot press, Finishing lines,Thermal drying system,Ultra-low emission exhaust gas treatment system and other equipment production and process design,Electronic control system design,programming,debugging of the whole project. |
Calorific value:18.5~65MW
Main fuel: Screening unqualified materials,Impurities,Dust,Sanding powder and other non-reusable combustible biomass waste in the production process.
Main components: fuel preparation system,combustion system, fine powder auto spray burning system, flue gas blending purification system, heat transfer oil system, steam system, dust removal and slag system,automatic control system.
Function: Supply heating for the process of drying,refiner,hot pressing,glue making.
Features: High efficiency,energy saving,environmental protection.
| Channel type drying system features 1.High thermal efficiency, it is the most advanced chips drying equipment in the world,equipped with automatic operating system, moisture content online detection device, fire extinguishing and explosion-proof device, with high efficiency and energy saving, high automation, simple operation, stable operation, uniform moisture content of chips after drying and other advantages. 2.The preheating device will blow the chips entering the system, so that the chips and hotair are fully mixed, At the same time, the impurities such as high density wood, sand and stone, nonferrous metal are pre-sorted and discharged through the discharge system. 3.The emergency discharge system is used to discharge the chips that enter the system through the rapid discharge device when the dryer breakdown, so as to avoid further losses caused by entering the subsequent equipment. |
| Press parameter | 4 ft | 6 ft | 8 ft | 9 ft | |
| Designed max pressing speed | mm/s | 1500 | 1500 | 1500 | 1500 |
| Heating platen width | mm | 1430 | 2050 | 2650 | 2950 |
| Steel belt infeed roller diameter | mm | 2070 | 2070 | 2070 | 2070 |
| Steel belt discharge roller diameter | mm | 2100 | 2100 | 2100 | 2100 |
| Roller rod diameter | mm | 18 | 18 | 18 | 18 |
| Steel belt width | mm | 1450 | 2070 | 2670 | 2970 |
| Max zone length | Mpa | 5 | 5 | 5 | 5 |
| Heating zone length | According to production capacity and hot pressing factor | ||||
| Total power | According to production capacity and product type | ||||
| Our Mechanical advantages 1. The hot press has a small gear opening, short auxiliary time, thin pre curing layer, and low sanding intensity. The machine operation is simple, the automatic detection is complete, and it can easily meet the requirements of automated production under unmanned control. 2. The products produced are in large format specifications and can be cut into non-standard sizes with different specifications according to user needs, meeting the diverse needs of users. The slab paving and transportation distance of the press is short, and the thickness symmetry of the paved slab is not easily damaged, and the finished slab will not deform. 3. The use of hot press machines has a low failure rate, long component life, and low maintenance costs. |
){kind=link}